BMW 4 Series F32 F33 Carbon Fiber Front Grille — Hand-Laid Carbon Weave, Fits Factory Mounts (2013-2017)

Swapping the standard slats for this grille gives the BMW 4 Series F32 F33 — Hand Laid Carbon Weave, Fits Factory Mounts (2013 2017) a much stronger front end for very little money.

Fits: BMW 4 Series F32 F33 — Hand Laid Carbon Weave, Fits Factory Mounts (2013 2017)

It is moulded to the same outline as the original grille on the BMW 4 Series F32 F33.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Warm the plastic clips before releasing them in cold weather; they are far less likely to snap.

Cars with active grille shutters or front cameras need the original sensor mounting transferred across.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: grille (left and right on twin-grille cars) and a fitment card.