Carbon fiber exhaust tip intake 2.5 inch outlet 3.5 inch exhaust tip car tailpipe

Fitted to the intake 2.5 inch outlet 3.5 inch car tailpipe to replace the dull factory outlets with a pair of finished tailpipes.

It weighs a fraction of the steel or plastic original, without the flex you get from a thin fiberglass copy.

Cut the old tips free if welded, slide these on, tighten the clamps evenly and check the tips sit level – around 30-45 minutes.

Fits: intake 2.5 inch outlet 3.5 inch car tailpipe

Sized to slide over the standard pipework of the intake 2.5 inch outlet 3.5, with a stainless clamp that tightens onto the original outlet.

Aftermarket exhausts often have a larger pipe diameter – measure yours before ordering so the clamps fit.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

OEM and private-label work is welcome: your part number, your logo, your packaging, with an NDA if you need one.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: tip set, stainless clamps and a fitting card.