Audi Styling A4 B9 Sedan Carbon Fiber Rear Spoiler with Hand-Laid Carbon Weave (2013)

A front splitter for the Audi Styling A4 B9 Sedan with Hand Laid Carbon Weave (2013) that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

Fits: Audi Styling A4 B9 Sedan with Hand Laid Carbon Weave (2013)

Shaped from a scan of the Audi Styling A4 B9 with bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Audi Styling A4 B9 with.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.