Carbon Fiber Front Lip for BMW E90 1m E90

A front splitter for the BMW E90 1m E90 that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

Carbon fiber – not a hydro-dipped or printed film. You can see the weave shift as the light moves across the surface.

Fitting is a two-person job: offer it up with tape in place, check the gaps left and right, then drive the self-tapping screws home through the pre-marked positions.

Fits: BMW E90 1m E90

The mounting tabs follow the factory bumper contour of the BMW E90 1m, so it lines up with the original fixing points.

Sport and standard bumpers on the same model can sit at different heights – compare the photos with your own bumper before ordering.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.