Carbon Fiber Front Lip for BMW F20 120i M Sport Hatchback (2016-2018)

Original price was: $395.00.Current price is: $365.00.

Front lip for the BMW F20 120i M Sport Hatchback (2016-2018) in carbon fiber. 45-90 minutes bolt-on fit, made to order in our own workshop, shipped worldwide with a 12-month warranty.

Buy Now
Free to 31 Countries
7-Day Defect Report
12-Month Warranty
Secure Payment
Share:
SKU: YD-FRONTLIP-JC-386 Category: Tags: , , ,

It sharpens the lower front bumper of the BMW F20 120i M Sport Hatchback (2016-2018), dropping the visual mass of the nose and giving the car the stance the factory left out.

Fits: BMW F20 120i M Sport Hatchback (2016-2018)

Shaped from a scan of the BMW F20 120i M bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the BMW F20 120i M.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

  • Gloss, matte, satin or forged carbon finish
  • 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
  • Coloured tinted clear coat (red, blue, yellow)
  • Logo application or badge cut-outs on request

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.

FAQs

Is this a direct fit for the BMW F20 120i M Sport Hatchback (2016-2018)?

It is a direct replacement for the factory front lip on the BMW F20 120i M Sport Hatchback (2016-2018), so the original hardware transfers across. Message us with your VIN or a photo if you want us to confirm fitment first – we reply within 24 hours.

How is it constructed?

Vacuum-bagged carbon fiber with a UV clear coat over the weave. The standard layup is 3K twill, and forged carbon, 6K and plain weave can all be produced on request.

How long does fitting take?

Nothing needs cutting on a standard car. Budget 45-90 minutes, and keep the old hardware to one side while you dry-fit the new part so you can compare it against the original front lip.

What is the production and delivery time?

Production is 10-15 business days, then transit. If you need it faster, message us before ordering and we will tell you honestly whether the date is achievable.

Can I customise the finish, weave or logo?

Weave, finish and edge trim are chosen when you order, and we can add your logo under the clear coat. Tell us what you are matching and we will send samples of the weave if that helps.

Can you produce larger quantities?

We are the manufacturer, so quantity pricing starts from small runs. New tooling from your CAD or sample part takes 15-25 days, then batches run in 20-35 days depending on quantity.

MaterialCarbon Fiber
FitmentBMW F20 120i M Sport Hatchback (2016-2018)
Part TypeFront Lip
FinishUV-stable Clear Coat
InstallationDirect Fit to Factory Mounting Points
Production Time10-15 Business Days (Made to Order)
Warranty12 Months
Stock StatusMade to Order
ConstructionCarbon fiber (3K twill)
Weight (approx.)1.6-2.4 kg
HardwareSelf-tapping screws + 3M VHB tape
Installation Time45-90 minutes
Custom OptionsWeave, finish (gloss / matte / forged), colour tint, logo
Bulk / OEMSample quantities and 50-1,000+ piece batches
PackingFoam wrap, double-wall carton
ShippingWorldwide tracked (DHL / UPS / FedEx)
BrandYeedercar

Reviews

There are no reviews yet.

Be the first to review “Carbon Fiber Front Lip for BMW F20 120i M Sport Hatchback (2016-2018)”

Your email address will not be published. Required fields are marked *