Carbon Fiber Front Lip for Volkswagen CC Arteon Hatchback 4-Door (2019-2020)

A front splitter for the Volkswagen CC Arteon Hatchback 4-Door (2019-2020) that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

Fits: Volkswagen CC Arteon Hatchback 4-Door (2019-2020)

Shaped from a scan of the Volkswagen CC Arteon bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Volkswagen CC Arteon.

Every panel is inspected for pinholes, resin pooling and weave distortion before the clear coat goes on.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.