Carbon Fiber Front Lip Splitter for BMW G26 4 Series G26 420i 430i 435i M440i 4doors (2021)

Fitted to the BMW G26 4 Series G26 420i 430i 435i M440i 4doors (2021), this front chin spoiler extends the lower bumper line and cuts lift over the nose at speed.

Fits: BMW G26 4 Series G26 420i 430i 435i M440i 4doors (2021)

Shaped from a scan of the BMW G26 4 Series 420i bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Every panel is inspected for pinholes, resin pooling and weave distortion before the clear coat goes on.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the BMW G26 4 Series 420i.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.