Custom Carbon Fiber Front Grille for Infiniti Q50 Sedan 4-Door (2018-2019)

Swapping the standard slats for this grille gives the Infiniti Q50 Sedan 4-Door (2018-2019) a much stronger front end for very little money.

Fits: Infiniti Q50 Sedan 4-Door (2018-2019)

It is moulded to the same outline as the original grille on the Infiniti Q50.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Warm the plastic clips before releasing them in cold weather; they are far less likely to snap.

Cars with active grille shutters or front cameras need the original sensor mounting transferred across.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: grille (left and right on twin-grille cars) and a fitment card.