Front Grille Mesh for BMW F10 in Carbon Fiber

Swapping the standard slats for this grille gives the BMW F10 in Carbon Fiber a much stronger front end for very little money.

Fits: BMW F10 in Carbon Fiber

It is moulded to the same outline as the original grille on the BMW F10 in Carbon Fiber.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Warm the plastic clips before releasing them in cold weather; they are far less likely to snap.

Cars with active grille shutters or front cameras need the original sensor mounting transferred across.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: grille (left and right on twin-grille cars) and a fitment card.