BMW G80 M3 G82 G83 Carbon Fiber Front Lip: Hand-Laid Carbon Weave Replacement

A front splitter for the BMW G80 M3 G82 G83 Lip: Hand Laid Carbon Weave Replacement that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

It weighs a fraction of the steel or plastic original, without the flex you get from a thin fiberglass copy.

Fits: BMW G80 M3 G82 G83 Lip: Hand Laid Carbon Weave Replacement

The mounting tabs follow the factory bumper contour of the BMW G80 M3 G82 G83, so it lines up with the original fixing points.

Fitting is a two-person job: offer it up with tape in place, check the gaps left and right, then drive the self-tapping screws home through the pre-marked positions.

Sport and standard bumpers on the same model can sit at different heights – compare the photos with your own bumper before ordering.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.

OEM and private-label work is welcome: your part number, your logo, your packaging, with an NDA if you need one.

Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.