BMW 3 Series F30 F31 Carbon Fiber Front Lip (2013-2017): Hand-Laid Carbon Weave Replacement

A front splitter for the BMW 3 Series F30 F31 Lip (2013 2017): Hand Laid Carbon Weave Replacement that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

Fits: BMW 3 Series F30 F31 Lip (2013 2017): Hand Laid Carbon Weave Replacement

Shaped from a scan of the BMW 3 Series F30 F31 bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Every panel is inspected for pinholes, resin pooling and weave distortion before the clear coat goes on.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the BMW 3 Series F30 F31.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.