FRP Front Lip Splitter for Lexus Es Sport (2018-2019)

It sharpens the lower front bumper of the Lexus Es Sport (2018-2019), dropping the visual mass of the nose and giving the car the stance the factory left out.

Fits: Lexus Es Sport (2018-2019)

Shaped from a scan of the Lexus Es bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Hand-laid fiberglass (FRP) with gel coat – the sensible choice if you plan to paint the part to match the body.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Lexus Es.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

This part ships ready for prep and paint, or usable as moulded. The same shape can also be produced in carbon fiber, forged carbon or fiberglass if you are building a set for a show car.

• Moulded finish for a dark car, or prep for body-colour paint
• Gloss black, satin black or raw grey finish
• Same part available in carbon fiber on request
• Set pricing when ordered together with other trim pieces

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Wipe with a soft cloth and a pH-neutral cleaner; avoid solvent-based dressings, which can dull the moulded finish.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.