Mercedes-Benz W204 C63 AMG Carbon Fiber Front Lip — Hand-Laid Carbon Weave, Fits Factory Mounts

Fitted to the Mercedes Benz W204 C63 AMG Lip — Hand Laid Carbon Weave, Fits Factory Mounts, this front chin spoiler extends the lower bumper line and cuts lift over the nose at speed.

Fits: Mercedes Benz W204 C63 AMG Lip — Hand Laid Carbon Weave, Fits Factory Mounts

Shaped from a scan of the Mercedes Benz W204 C63 AMG bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Mercedes Benz W204 C63 AMG.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.