BMW F82 M4 Carbon Fiber Rear Spoiler | Hand-Laid Carbon Weave

The profile follows the boot line of the BMW F82 M4, so it reads as a factory option rather than an add-on.

The clear coat is UV-stabilised, so the weave stays dark instead of fading to a chalky yellow under summer sun.

Warm the boot lid, clean it with IPA, dry-fit with tape, then press and hold – about 30-40 minutes start to finish.

Fits: BMW F82 M4

The underside is moulded to the boot curvature of the BMW F82 M4, so the tape line contacts the panel evenly.

Aftermarket paint protection film or a previous spoiler leaves a residue line – clean it fully or the new tape lifts at the ends.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Our plant runs autoclave curing with logged temperature and pressure curves, so if a part ever fails we can trace the batch it came from.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: spoiler, pre-applied automotive tape, an alcohol wipe and a fitment card.