Custom Carbon Fiber Winglet for BMW S1000RR (2023)

Made for the BMW S1000RR (2023), replacing the factory part with a lighter hand-finished one.

The clear coat is UV-stabilised, so the weave stays dark instead of fading to a chalky yellow under summer sun.

Standard hand tools are enough, and the factory fixings transfer across – allow 30-60 minutes.

Fits: BMW S1000RR (2023)

It is made to the original mounting pattern of the BMW S1000RR, so the factory fixings are re-used.

Trim levels and facelifts of the BMW S1000RR can change the mounting points – compare the photos with your own car before ordering.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: part and a fitment card.