BMW F80 M3 F82 F83 Carbon Fiber Front Lip (2014-2018) | Hand-Laid Carbon Weave — Yeedercar Factory

Fitted to the BMW F80 M3 F82 F83 Lip (2014 2018), this front chin spoiler extends the lower bumper line and cuts lift over the nose at speed.

Carbon fiber – not a hydro-dipped or printed film. You can see the weave shift as the light moves across the surface.

Fitting is a two-person job: offer it up with tape in place, check the gaps left and right, then drive the self-tapping screws home through the pre-marked positions.

Fits: BMW F80 M3 F82 F83 Lip (2014 2018)

The mounting tabs follow the factory bumper contour of the BMW F80 M3 F82 F83, so it lines up with the original fixing points.

Sport and standard bumpers on the same model can sit at different heights – compare the photos with your own bumper before ordering.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Our plant runs autoclave curing with logged temperature and pressure curves, so if a part ever fails we can trace the batch it came from.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.