Yeedercar Factory-Made Carbon Fiber Front Lip for BMW F90 M5 (2018-2020)

Fitted to the BMW F90 M5 (2018-2020), this front chin spoiler extends the lower bumper line and cuts lift over the nose at speed.

Fits: BMW F90 M5 (2018-2020)

Shaped from a scan of the BMW F90 M5 bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the BMW F90 M5.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.