Yeedercar Factory-Made Carbon Fiber Front Lip Splitter for Ferrari Speciale Coupe 2-Door (2014-2015)
$620.00 Original price was: $650.00.Current price is: $620.00.
Ferrari Speciale Coupe 2-Door (2014-2015) front lip in carbon fiber. Factory-direct from our Foshan plant, custom finishes available, usually 10-15 business days in production before dispatch.
It sharpens the lower front bumper of the Ferrari Speciale Coupe 2-Door (2014-2015), dropping the visual mass of the nose and giving the car the stance the factory left out.
Fits: Ferrari Speciale Coupe 2-Door (2014-2015)
Shaped from a scan of the Ferrari Speciale bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.
Vacuum-bagged carbon fiber, autoclave cured, then finished with a UV-stable clear coat that resists yellowing in strong sun.
Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Ferrari Speciale.
If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.
Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.
- Gloss, matte, satin or forged carbon finish
- 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
- Coloured tinted clear coat (red, blue, yellow)
- Logo application or badge cut-outs on request
The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.
Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.
OEM and private-label work is welcome: your part number, your logo, your packaging, with an NDA if you need one.
Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.
Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.
In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.
Related: Carbon Fiber Front Lip for Mercedes-Benz W205 A205 C205 · Carbon Fiber Front Lip for Mercedes-Benz Jcsportline (2022) – · Carbon Fiber Front Lip Splitter for Audi RS3
FAQs
Does this front lip fit the Ferrari Speciale Coupe 2-Door (2014-2015)?
Yes. The tooling came off an original Ferrari Speciale part, so the bolts and clips line up the same way. The one thing worth checking is the body style: sedan, coupe and estate versions of the same model can use different fixings.
What is it made from?
Vacuum-bagged carbon fiber with a UV clear coat over the weave. The standard layup is 3K twill, and forged carbon, 6K and plain weave can all be produced on request.
Do I need to drill or cut anything?
Nothing needs cutting on a standard car. Budget 45-90 minutes, and keep the old hardware to one side while you dry-fit the new part so you can compare it against the original front lip.
What is the production and delivery time?
Production is 10-15 business days, then transit. If you need it faster, message us before ordering and we will tell you honestly whether the date is achievable.
Can I customise the finish, weave or logo?
Weave, finish and edge trim are chosen when you order, and we can add your logo under the clear coat. Tell us what you are matching and we will send samples of the weave if that helps.
Can you produce larger quantities?
We are the manufacturer, so quantity pricing starts from small runs. New tooling from your CAD or sample part takes 15-25 days, then batches run in 20-35 days depending on quantity.
| Material | Carbon Fiber |
| Fitment | Ferrari Speciale Coupe 2-Door (2014-2015) |
| Part Type | Front Lip Splitter |
| Finish | UV-stable Clear Coat |
| Installation | Direct Fit to Factory Mounting Points |
| Production Time | 10-15 Business Days (Made to Order) |
| Warranty | 12 Months |
| Stock Status | Made to Order |
| Construction | Carbon fiber (3K twill) |
| Weight (approx.) | 1.6-2.4 kg |
| Hardware | Self-tapping screws + 3M VHB tape |
| Installation Time | 45-90 minutes |
| Custom Options | Weave, finish (gloss / matte / forged), colour tint, logo |
| Bulk / OEM | Sample quantities and 50-1,000+ piece batches |
| Packing | Foam wrap, double-wall carton |
| Shipping | Worldwide tracked (DHL / UPS / FedEx) |
| Brand | Yeedercar |
Related products
-
Sale!
Yeedercar Factory-Made Carbon Fiber Front Lip for Tesla Model Y (2020-2021)
$280.00 Original price was: $310.00.Current price is: $280.00. Add to cart -
Sale!
BMW 3 Series E92 Lci Carbon Fiber Front Lip — Hand-Laid Carbon Weave, Direct Fit (2008-2011)
$230.00 Original price was: $260.00.Current price is: $230.00. Add to cart -
Sale!
Yeedercar Front Lip Splitter in FRP for BMW F30 F31 325i 320i 328i 335i M Sport (2012-2018)
$230.00 Original price was: $260.00.Current price is: $230.00. Add to cart -
Sale!
Front Lip in Carbon Fiber for Porsche Lower Macan SUV (2014-2017)
$230.00 Original price was: $260.00.Current price is: $230.00. Add to cart
Reviews
There are no reviews yet.