Yeedercar Front Lip Splitter in FRP for Alfa Romeo Giulia Sport (2016-2018)

A front splitter for the Alfa Romeo Giulia Sport (2016-2018) that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

FRP needs priming and paint before fitting; the gel-coat surface is only a base, not a final finish.

Fits: Alfa Romeo Giulia Sport (2016-2018)

The mounting tabs follow the factory bumper contour of the Alfa Romeo Giulia, so it lines up with the original fixing points.

Fitting is a two-person job: offer it up with tape in place, check the gaps left and right, then drive the self-tapping screws home through the pre-marked positions.

Sport and standard bumpers on the same model can sit at different heights – compare the photos with your own bumper before ordering.

Finish options are gloss black, satin black or a raw moulding that is ready for body-colour paint. If you would rather have the same part in carbon fiber, we can lay it up in carbon fiber instead – just ask for a quote.

• Gloss black, satin black or raw grey finish
• Same part available in carbon fiber on request
• Set pricing when ordered together with other trim pieces
• Moulded finish for a dark car, or prep for body-colour paint

Clean with mild soap and water; if the part is heading for paint, sand it lightly and use a plastic primer first.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.