Yeedercar Front Splitter in Carbon Fiber for Porsche Turbo Coupe 2-Door (2019-2021)

Fitted to the Porsche Turbo Coupe 2-Door (2019-2021), this front chin spoiler extends the lower bumper line and cuts lift over the nose at speed.

Fits: Porsche Turbo Coupe 2-Door (2019-2021)

Shaped from a scan of the Porsche Turbo bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Porsche Turbo.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.