Yeedercar Custom FRP Trunk Spoiler for Tesla Model S 2014 2019
$200.00 Original price was: $230.00.Current price is: $200.00.
Tesla Model S 2014 2019 (2014-2019) ducktail spoiler in fiberglass. Factory-direct from our Foshan plant, custom finishes available, usually 10-15 business days in production before dispatch.
On the Tesla Model S 2014 2019 it removes the flat, unfinished look of the standard boot lid without going to a full wing.
FRP needs priming and paint before fitting; the gel-coat surface is only a base, not a final finish.
Warm the boot lid, clean it with IPA, dry-fit with tape, then press and hold – about 30-40 minutes start to finish.
Fits: Tesla Model S 2014 2019
The underside is moulded to the boot curvature of the Tesla Model S 2014 2019, so the tape line contacts the panel evenly.
Aftermarket paint protection film or a previous spoiler leaves a residue line – clean it fully or the new tape lifts at the ends.
Finish options are gloss black, satin black or a raw moulding that is ready for body-colour paint. If you would rather have the same part in carbon fiber, we can lay it up in carbon fiber instead – just ask for a quote.
- Set pricing when ordered together with other trim pieces
- Moulded finish for a dark car, or prep for body-colour paint
- Gloss black, satin black or raw grey finish
- Same part available in carbon fiber on request
Clean with mild soap and water; if the part is heading for paint, sand it lightly and use a plastic primer first.
Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.
Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.
For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.
Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.
In the box: spoiler, pre-applied automotive tape, an alcohol wipe and a fitment card.
Related: Toyota Camry Hybrid Xle Se Carbon Fiber Rear Spoiler · Yeedercar Glossy Carbon Fiber Rear Spoiler for Tesla Model · Yeedercar Carbon Fiber Roof Spoiler for Mercedes-Benz V Class
FAQs
Will this ducktail spoiler fit my Tesla Model S 2014 2019?
It is built to the original Tesla Model S 2014 2019 mounting pattern, so the factory fixings are re-used and nothing has to be cut or drilled. If your car is a facelift or a different trim level of the same model, send us a photo of the ducktail spoiler area and we will confirm before you order.
Is it real fiberglass (FRP)?
This one is moulded in fiberglass (FRP) – flexible, impact tolerant and far cheaper than carbon for the same shape. The same part can also be produced in carbon fiber if you prefer; ask us for a quote.
Can I fit it myself?
Most owners do this at home in about 30-45 minutes with pre-applied 3m tape (drilling optional) and ordinary hand tools – the original fixings are re-used, so nothing needs welding or painting afterwards.
How long until it ships?
Each part is made after you order it, so allow 10-15 business days in production before dispatch. Express DHL, UPS and FedEx options are available, and tracking is sent as soon as it leaves the workshop.
Can you make it in a different finish or colour?
Yes. Gloss, matte, satin and forged carbon are all available, along with tinted clear coats and 3K, 6K or plain weave. Logo and emblem application under the clear coat is possible on most parts.
Do you offer wholesale or OEM pricing for bulk orders?
Yes – one piece is fine for a sample, and the same mould runs batches of 50, 200 or 1,000+ pieces. OEM and private-label work is welcome with your part number, logo and packaging.
| Construction | Fiberglass (FRP) |
| Weight (approx.) | 1.0-1.8 kg |
| Hardware | Pre-applied 3M tape (drilling optional) |
| Installation Time | 30-45 minutes |
| Custom Options | Gloss black, satin black or paint-ready moulding; carbon version on request |
| Bulk / OEM | Sample quantities and 50-1,000+ piece batches |
| Packing | Foam wrap, double-wall carton |
| Shipping | Worldwide tracked (DHL / UPS / FedEx) |
| Brand | Yeedercar |
Related products
-
Sale!
Yeedercar Factory-Made Carbon Fiber Trunk Spoiler for BMW 528i F10 2010 2013
$300.00 Original price was: $330.00.Current price is: $300.00. Add to cart -
Sale!
Custom Carbon Fiber Rear Trunk Spoiler for BMW M5 G90 G99 / i5 G60 (2024)
$300.00 Original price was: $330.00.Current price is: $300.00. Add to cart -
Sale!
Yeedercar Carbon Fiber Rear Spoiler for Tesla Model 3 / Model Y
$105.00 Original price was: $125.00.Current price is: $105.00. Add to cart -
Sale!
Yeedercar Carbon Fiber Trunk Spoiler for Mercedes-Benz W207 E260
$300.00 Original price was: $330.00.Current price is: $300.00. Add to cart
Reviews
There are no reviews yet.