Carbon Fiber Bonnet for Alfa Romeo Giulia Sedan 4-Door (2017-2020)

Fitted to the Alfa Romeo Giulia Sedan 4-Door (2017-2020), it drops the nose weight and finally gives the engine bay something worth opening.

Fits: Alfa Romeo Giulia Sedan 4-Door (2017-2020)

Produced from the original panel dimensions of the Alfa Romeo Giulia so the shut lines land where the factory panel does.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Gas struts and the latch transfer from your original bonnet; expect to spend a little time on panel gaps afterwards.

A bonnet held open by a prop rod instead of gas struts needs the prop position checked before the swap.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: bonnet panel, mounting hardware and a care card.