Carbon Fiber Rear Diffuser for Kia K5 (2013)

Fitted to the Kia K5 (2013), it hides the underside of the rear bumper and adds the motorsport look the standard car lacks.

Fits: Kia K5 (2013)

The mounting points line up with the factory lower bumper fixings on the Kia K5.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

It fixes from underneath with the supplied screws and clips; removing the rear bumper is not necessary on the Kia K5.

If your car has a factory tow bar, the diffuser may need trimming around the mounting bracket.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: diffuser, screws, clips and a fitment card.