Yeedercar Carbon Fiber Exhaust Tips with M Logo for BMW M3 M4

Fitted to the BMW M3 M4 to replace the dull factory outlets with a pair of finished tailpipes.

Layered from 3K 2×2 twill and cured under vacuum in our own autoclave, so the resin-to-fiber ratio stays consistent from part to part.

Cut the old tips free if welded, slide these on, tighten the clamps evenly and check the tips sit level – around 30-45 minutes.

Fits: BMW M3 M4

Sized to slide over the standard pipework of the BMW M3 M4, with a stainless clamp that tightens onto the original outlet.

Aftermarket exhausts often have a larger pipe diameter – measure yours before ordering so the clamps fit.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Our plant runs autoclave curing with logged temperature and pressure curves, so if a part ever fails we can trace the batch it came from.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: tip set, stainless clamps and a fitting card.