BMW F10 5 Series Carbon Fiber Steering Wheel with Hand-Laid Carbon Weave

A hand-built replacement wheel for the BMW F10 5 Series with Hand Laid Carbon Weave: same diameter, same airbag, but with the rim, grips and stitching you choose.

Fits: BMW F10 5 Series with Hand Laid Carbon Weave

Airbag, horn, paddles and trim transfer across from your original wheel on the BMW F10 5 Series with.

Every panel is inspected for pinholes, resin pooling and weave distortion before the clear coat goes on.

Confident DIY owners do this in about an hour with a torque wrench and a steering-wheel puller; we include the battery-disconnect procedure.

Paddle-shift cars and manual cars use different cores; confirm from the listing photos before ordering.

Every wheel is finished to your spec – grip material, stitching colour, centre stripe and paddle finish are all selected when you order.

• Carbon + leather, carbon + Alcantara or full carbon rim
• Gloss, matte, forged or coloured carbon finish
• Stitching colour and 12 o’clock centre stripe
• Flat bottom, round or slightly squared rim profile

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: finished steering wheel, centre cover and a fitting guide.