Buick Regal Carbon Fiber Steering Wheel — Leather Side Grips, Direct Fit
$325.00 Original price was: $385.00.Current price is: $325.00.
Steering wheel for the Buick Regal — Leather Grips, Direct Fit in carbon fiber. 45-75 minutes (professional advised) bolt-on fit, made to order in our own workshop, shipped worldwide with a 12-month warranty.
Built on an OEM core for the Buick Regal — Leather Grips, Direct Fit, so it keeps the factory airbag and every steering-wheel button you already use.
Layered from 3K 2×2 twill and cured under vacuum in our own autoclave, so the resin-to-fiber ratio stays consistent from part to part.
Fits: Buick Regal — Leather Grips, Direct Fit
The core comes from a Buick Regal — Leather Grips, wheel, so the splines, airbag connectors and button looms are factory – no adapters.
Professional fitting is recommended because of the airbag: disconnect the battery negative, wait, then swap the wheel and torque the centre nut to the factory figure.
If your original wheel has a heated rim, that function is not carried over – choose Alcantara grips if you want a warmer feel in winter.
Because each wheel is built to order, you choose the trim: carbon with leather, carbon with Alcantara or full carbon, plus the stitching colour, the 12 o’clock stripe and whether you want the top section left in leather.
- Gloss, matte, forged or coloured carbon finish
- Stitching colour and 12 o’clock centre stripe
- Flat bottom, round or slightly squared rim profile
- Carbon + leather, carbon + Alcantara or full carbon rim
Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.
Our plant runs autoclave curing with logged temperature and pressure curves, so if a part ever fails we can trace the batch it came from.
Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.
One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.
Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.
In the box: finished steering wheel, centre cover and a fitting guide.
Handcrafted custom carbon fiber steering wheel designed specifically for the Buick Regal, built to factory specifications for a direct, bolt-on fit with no modification required. Every piece is made from genuine carbon fiber with a UV-stable clear coat, quality-checked before shipping.
Available Steering Wheel Designs:
Carbon Fiber + Leather/Alcantara
Full Carbon Fiber
Carbon Fiber Color (Gloss/Matte Carbon)
Black/Red/Blue/White Carbon Fiber
Forged Carbon Fiber
Stitching
Black/Red/Yellow/Blue/Green/Orange/White/Mix Stitching
12 O’Clock Stripe
Black/Red/Yellow/Blue/Green/Orange/White/Mix Stripe
Compatible with Buick Regal
Recommended Products
-
Sale!
Carbon Fiber Front Grille Cover Trim for Land Rover Defender Sport Utility 4-Door (2020-2023)
$345.00 Original price was: $375.00.Current price is: $345.00.
Add to cart
-
Sale!
Front Grille Cover Trim for Audi RSQ8 (2021-2023) in Carbon Fiber
$345.00 Original price was: $375.00.Current price is: $345.00.
Add to cart
-
Sale!
Factory-Made Carbon Fiber Front Grille for BMW 3 Series G20 G28 M-SPORT (2019-2020)
$345.00 Original price was: $375.00.Current price is: $345.00.
Add to cart
Related: All Buick carbon fiber parts · Buick Regal Envision Carbon Fiber Steering Wheel: Hand-Laid Carbon · Buick Gl8 Carbon Fiber Steering Wheel | Wood-Grain Rim · Buick Verano Carbon Fiber Steering Wheel | Leather Side
FAQs
Will this steering wheel fit my Buick Regal — Leather Grips, Direct Fit?
It is built to the original Buick Regal — Leather Grips, mounting pattern, so the factory fixings are re-used and nothing has to be cut or drilled. If your car is a facelift or a different trim level of the same model, send us a photo of the steering wheel area and we will confirm before you order.
Is it carbon fiber?
Carbon fiber, laid up by hand, vacuum bagged and autoclave cured in our own workshop, then finished with a UV-stable clear coat. It is not a hydro-dipped or printed film.
Can I fit it myself?
Most owners do this at home in about 45-75 minutes (professional advised) with re-uses oem core, airbag and buttons and ordinary hand tools – the original fixings are re-used, so nothing needs welding or painting afterwards.
How long until it ships?
Each part is made after you order it, so allow 10-15 business days in production before dispatch. Express DHL, UPS and FedEx options are available, and tracking is sent as soon as it leaves the workshop.
Can you make it in a different finish or colour?
Yes. Gloss, matte, satin and forged carbon are all available, along with tinted clear coats and 3K, 6K or plain weave. Logo and emblem application under the clear coat is possible on most parts.
Do you offer wholesale or OEM pricing for bulk orders?
Yes – one piece is fine for a sample, and the same mould runs batches of 50, 200 or 1,000+ pieces. OEM and private-label work is welcome with your part number, logo and packaging.
| Material | Normal Carbon Fiber |
| Finish | Matte |
| Grip | Alcantara |
| Stitching | — |
| Fitment | — |
| Production Time | 12–18 Business Days |
| Warranty | 12 Months |
| Stock Status | Made to Order |
| Shipping | Worldwide tracked (DHL / UPS / FedEx / 4PX) |
| Weight | — |
| Origin | China |
| Construction | Carbon fiber (3K twill) |
| Weight (approx.) | 2.2-2.8 kg |
| Hardware | Re-uses OEM core, airbag and buttons |
| Installation Time | 45-75 minutes (professional advised) |
| Custom Options | Weave, finish (gloss / matte / forged), colour tint, logo |
| Bulk / OEM | Sample quantities and 50-1,000+ piece batches |
| Packing | Foam wrap, double-wall carton |
| Brand | Yeedercar |







Reviews
There are no reviews yet.