Engine Hood for BMW G20 330i M340i M Sport Sedan (2019-2020) in Carbon Fiber

A direct replacement for the steel bonnet on the BMW G20 330i M340i M Sport Sedan (2019-2020) in Carbon Fiber, removing real weight from the highest point of the car.

Layered from 3K 2×2 twill and cured under vacuum in our own autoclave, so the resin-to-fiber ratio stays consistent from part to part.

Fits: BMW G20 330i M340i M Sport Sedan (2019-2020) in Carbon Fiber

It re-uses the factory hinges, latch and bonnet strut mounts on the BMW G20 330i M340i M, so no cutting is needed.

Two people and a soft blanket: unbolt the original bonnet at the hinges, transfer the latch and struts, then align the shut lines – around 60-90 minutes.

If your car uses bonnet-mounted washer jets, they transfer across to the original mounting positions.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Our plant runs autoclave curing with logged temperature and pressure curves, so if a part ever fails we can trace the batch it came from.

Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.

In the box: bonnet panel, mounting hardware and a care card.