Yeedercar 3K Carbon Fiber Tube – 20mm OD x 16mm ID x 1.5m

A direct replacement part for the Yeedercar 3K Tube 20mm OD x 16mm ID x 1.5m, produced to the original dimensions rather than a universal fit.

Fits: Yeedercar 3K Tube 20mm OD x 16mm ID x 1.5m

The mould follows the original part on the Yeedercar 3K Tube 20mm OD.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Dry-fit the part first, then tighten the fixings evenly from the centre outwards.

Trim levels and facelifts of the Yeedercar 3K Tube 20mm OD can change the mounting points – compare the photos with your own car before ordering.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: part and a fitment card.