Tesla Model 3 Carbon Fiber Steering Wheel with Alcantara Side Grips

A hand-built replacement wheel for the Tesla Model 3 with Alcantara Grips: same diameter, same airbag, but with the rim, grips and stitching you choose.

Fits: Tesla Model 3 with Alcantara Grips

Airbag, horn, paddles and trim transfer across from your original wheel on the Tesla Model 3 with Alcantara.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Confident DIY owners do this in about an hour with a torque wrench and a steering-wheel puller; we include the battery-disconnect procedure.

Paddle-shift cars and manual cars use different cores; confirm from the listing photos before ordering.

Every wheel is finished to your spec – grip material, stitching colour, centre stripe and paddle finish are all selected when you order.

• Carbon + leather, carbon + Alcantara or full carbon rim
• Gloss, matte, forged or coloured carbon finish
• Stitching colour and 12 o’clock centre stripe
• Flat bottom, round or slightly squared rim profile

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: finished steering wheel, centre cover and a fitting guide.