Yeedercar Carbon Fiber Fairing for BMW s1000rr (2019-2025)

It replaces the standard panel on the BMW s1000rr (2019-2025) with a lightweight, hand-laid composite version.

Fits: BMW s1000rr (2019-2025)

Every fixing point follows the factory panel of the BMW s1000rr, including the heat-shield mounting tabs.

Every panel is inspected for pinholes, resin pooling and weave distortion before the clear coat goes on.

Seat the panel dry first to check clearance around the exhaust and radiator shroud before final tightening.

Bikes with aftermarket exhausts often need the belly pan clearanced slightly – trim it dry, not bolted up.

Weave, weave direction and clear-coat finish are all selected at order time, and the panel can be laid up in forged carbon or twill to match the rest of the bike.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: panel, mounting hardware where required, and a fitting card.