Yeedercar Glossy Carbon Fiber Fairing for Ducati

A direct replacement panel for the fairing on the Ducati, moulded from the original shape.

Layered from 3K 2×2 twill and cured under vacuum in our own autoclave, so the resin-to-fiber ratio stays consistent from part to part.

Fits: Ducati

The mould came off an original panel for the Ducati, so the mounting lugs, bolts and panel gaps line up.

Fasteners transfer from the original panel; allow 30-60 minutes and keep the bolts in order as you remove them.

Bikes with aftermarket exhausts often need the belly pan clearanced slightly – trim it dry, not bolted up.

Weave, weave direction and clear-coat finish are all selected at order time, and the panel can be laid up in forged carbon or twill to match the rest of the bike.

• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.

In the box: panel, mounting hardware where required, and a fitting card.