Yeedercar Carbon Fiber Rear Spoiler for BMW 5 Series G30 / G38

On the BMW 5 Series G30 / G38 it removes the flat, unfinished look of the standard boot lid without going to a full wing.

Carbon fiber – not a hydro-dipped or printed film. You can see the weave shift as the light moves across the surface.

Warm the boot lid, clean it with IPA, dry-fit with tape, then press and hold – about 30-40 minutes start to finish.

Fits: BMW 5 Series G30 / G38

The underside is moulded to the boot curvature of the BMW 5 Series G30 /, so the tape line contacts the panel evenly.

Aftermarket paint protection film or a previous spoiler leaves a residue line – clean it fully or the new tape lifts at the ends.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: spoiler, pre-applied automotive tape, an alcohol wipe and a fitment card.