Toyota Hr Izoa Carbon Fiber Steering Wheel (2018+): Hand-Laid Carbon Weave Replacement

A hand-built replacement wheel for the Toyota Hr Izoa (2018+): Hand Laid Carbon Weave Replacement: same diameter, same airbag, but with the rim, grips and stitching you choose.

Fits: Toyota Hr Izoa (2018+): Hand Laid Carbon Weave Replacement

Airbag, horn, paddles and trim transfer across from your original wheel on the Toyota Hr Izoa : Hand.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Confident DIY owners do this in about an hour with a torque wrench and a steering-wheel puller; we include the battery-disconnect procedure.

Paddle-shift cars and manual cars use different cores; confirm from the listing photos before ordering.

Every wheel is finished to your spec – grip material, stitching colour, centre stripe and paddle finish are all selected when you order.

• Carbon + leather, carbon + Alcantara or full carbon rim
• Gloss, matte, forged or coloured carbon finish
• Stitching colour and 12 o’clock centre stripe
• Flat bottom, round or slightly squared rim profile

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: finished steering wheel, centre cover and a fitting guide.