Mitsubishi Outlander Carbon Fiber Steering Wheel — Leather Side Grips, Fits Factory Mounts

A hand-built replacement wheel for the Mitsubishi Outlander — Leather Grips, Fits Factory Mounts: same diameter, same airbag, but with the rim, grips and stitching you choose.

Fits: Mitsubishi Outlander — Leather Grips, Fits Factory Mounts

Airbag, horn, paddles and trim transfer across from your original wheel on the Mitsubishi Outlander — Leather Grips,.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Confident DIY owners do this in about an hour with a torque wrench and a steering-wheel puller; we include the battery-disconnect procedure.

Paddle-shift cars and manual cars use different cores; confirm from the listing photos before ordering.

Every wheel is finished to your spec – grip material, stitching colour, centre stripe and paddle finish are all selected when you order.

• Carbon + leather, carbon + Alcantara or full carbon rim
• Gloss, matte, forged or coloured carbon finish
• Stitching colour and 12 o’clock centre stripe
• Flat bottom, round or slightly squared rim profile

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: finished steering wheel, centre cover and a fitting guide.