Yeedercar Factory-Made FRP Front Lip Splitter for Lexus IS300 IS350 Base Sport Sedan 4-Door (2017-2018)

A front splitter for the Lexus IS300 IS350 Base Sport Sedan 4-Door (2017-2018) that turns the standard front bumper into something closer to the factory aero pack, without swapping the whole bumper.

Fits: Lexus IS300 IS350 Base Sport Sedan 4-Door (2017-2018)

Shaped from a scan of the Lexus IS300 IS350 Base bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

FRP needs priming and paint before fitting; the gel-coat surface is only a base, not a final finish.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Lexus IS300 IS350 Base.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

This part ships ready for prep and paint, or usable as moulded. The same shape can also be produced in carbon fiber, forged carbon or fiberglass if you are building a set for a show car.

• Moulded finish for a dark car, or prep for body-colour paint
• Gloss black, satin black or raw grey finish
• Same part available in carbon fiber on request
• Set pricing when ordered together with other trim pieces

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.

Wipe with a soft cloth and a pH-neutral cleaner; avoid solvent-based dressings, which can dull the moulded finish.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.