Yeedercar Front Lip in Carbon Fiber for Mercedes-Benz W212 E63 W212 AMG (2014-2016)

It sharpens the lower front bumper of the Mercedes-Benz W212 E63 W212 AMG (2014-2016), dropping the visual mass of the nose and giving the car the stance the factory left out.

Fits: Mercedes-Benz W212 E63 W212 AMG (2014-2016)

Shaped from a scan of the Mercedes-Benz W212 E63 AMG bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the Mercedes-Benz W212 E63 AMG.

Vacuum-bagged carbon fiber, autoclave cured, then finished with a UV-stable clear coat that resists yellowing in strong sun.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

OEM and private-label work is welcome: your part number, your logo, your packaging, with an NDA if you need one.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.