BMW 3 Series F30 4 Carbon Fiber Hood (2015-2018) | Hand-Laid Carbon Weave

Fitted to the BMW 3 Series F30 4 (2015 2018), it drops the nose weight and finally gives the engine bay something worth opening.

Fits: BMW 3 Series F30 4 (2015 2018)

Produced from the original panel dimensions of the BMW 3 Series F30 4 so the shut lines land where the factory panel does.

Gas struts and the latch transfer from your original bonnet; expect to spend a little time on panel gaps afterwards.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

A bonnet held open by a prop rod instead of gas struts needs the prop position checked before the swap.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: bonnet panel, mounting hardware and a care card.