Custom Carbon Fiber Engine Hood for Mercedes-Benz W447 (2015-2019)

A direct replacement for the steel bonnet on the Mercedes-Benz W447 (2015-2019), removing real weight from the highest point of the car.

The clear coat is UV-stabilised, so the weave stays dark instead of fading to a chalky yellow under summer sun.

Two people and a soft blanket: unbolt the original bonnet at the hinges, transfer the latch and struts, then align the shut lines – around 60-90 minutes.

Fits: Mercedes-Benz W447 (2015-2019)

It re-uses the factory hinges, latch and bonnet strut mounts on the Mercedes-Benz W447, so no cutting is needed.

If your car uses bonnet-mounted washer jets, they transfer across to the original mounting positions.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: bonnet panel, mounting hardware and a care card.