Mercedes-Benz W204 C204 C63 AMG Carbon Fiber Rear Diffuser (2015) | Hand-Laid Carbon Weave
$345.00 Original price was: $375.00.Current price is: $345.00.
Made-to-order rear valance for the Mercedes Benz W204 C204 C63 AMG (2015) - carbon fiber, factory screws + supplied clips, worldwide shipping and a 12-month warranty against manufacturing defects.
Fitted to the Mercedes Benz W204 C204 C63 AMG (2015), it hides the underside of the rear bumper and adds the motorsport look the standard car lacks.
Fits: Mercedes Benz W204 C204 C63 AMG (2015)
The mounting points line up with the factory lower bumper fixings on the Mercedes Benz W204 C204 C63.
Every panel is inspected for pinholes, resin pooling and weave distortion before the clear coat goes on.
It fixes from underneath with the supplied screws and clips; removing the rear bumper is not necessary on the Mercedes Benz W204 C204 C63.
If your car has a factory tow bar, the diffuser may need trimming around the mounting bracket.
Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.
- Gloss, matte, satin or forged carbon finish
- 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
- Coloured tinted clear coat (red, blue, yellow)
- Logo application or badge cut-outs on request
This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.
Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.
For bulk orders we quote from your drawing, scan or sample part; new tooling usually takes 15-25 days, then each batch runs in 20-35 days depending on quantity.
Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.
Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.
In the box: diffuser, screws, clips and a fitment card.
Related: Yeedercar Handcrafted Carbon Fiber Rear Diffuser Lip for · Yeedercar Carbon Fiber Rear Diffuser for Audi RSQ8 4-Door · Yeedercar Rear Diffuser in Carbon Fiber for Mercedes-Benz (2022)
FAQs
Will this rear valance fit my Mercedes Benz W204 C204 C63 AMG (2015)?
It is built to the original Mercedes Benz W204 C204 C63 mounting pattern, so the factory fixings are re-used and nothing has to be cut or drilled. If your car is a facelift or a different trim level of the same model, send us a photo of the rear valance area and we will confirm before you order.
Is it carbon fiber?
Vacuum-bagged carbon fiber with a UV clear coat over the weave. The standard layup is 3K twill, and forged carbon, 6K and plain weave can all be produced on request.
Can I fit it myself?
Nothing needs cutting on a standard car. Budget 60-90 minutes, and keep the old hardware to one side while you dry-fit the new part so you can compare it against the original rear valance.
What is the production and delivery time?
Production is 10-15 business days, then transit. If you need it faster, message us before ordering and we will tell you honestly whether the date is achievable.
Can I customise the finish, weave or logo?
Weave, finish and edge trim are chosen when you order, and we can add your logo under the clear coat. Tell us what you are matching and we will send samples of the weave if that helps.
Can you produce larger quantities?
We are the manufacturer, so quantity pricing starts from small runs. New tooling from your CAD or sample part takes 15-25 days, then batches run in 20-35 days depending on quantity.
| Material | Carbon Fiber |
| Fitment | Mercedes-Benz W204 C204 C63 AMG 12 (2015) |
| Part Type | Rear Diffuser Lip |
| Finish | UV-stable Clear Coat |
| Installation | Direct Fit to Factory Mounting Points |
| Production Time | 10-15 Business Days (Made to Order) |
| Warranty | 12 Months |
| Stock Status | Made to Order |
| Construction | Carbon fiber (3K twill) |
| Weight (approx.) | 2.5-4.0 kg |
| Hardware | Factory screws + supplied clips |
| Installation Time | 60-90 minutes |
| Custom Options | Weave, finish (gloss / matte / forged), colour tint, logo |
| Bulk / OEM | Sample quantities and 50-1,000+ piece batches |
| Packing | Foam wrap, double-wall carton |
| Shipping | Worldwide tracked (DHL / UPS / FedEx) |
| Brand | Yeedercar |







Reviews
There are no reviews yet.