Infinity Q50 Q50L Carbon Fiber Steering Wheel Made to Order — Hand-Laid Carbon Weave

A hand-built replacement wheel for the Infinity Q50 Q50L Made to Order — Hand Laid Carbon Weave: same diameter, same airbag, but with the rim, grips and stitching you choose.

Fits: Infinity Q50 Q50L Made to Order — Hand Laid Carbon Weave

Airbag, horn, paddles and trim transfer across from your original wheel on the Infinity Q50 Q50L Made to.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Confident DIY owners do this in about an hour with a torque wrench and a steering-wheel puller; we include the battery-disconnect procedure.

Paddle-shift cars and manual cars use different cores; confirm from the listing photos before ordering.

Every wheel is finished to your spec – grip material, stitching colour, centre stripe and paddle finish are all selected when you order.

• Carbon + leather, carbon + Alcantara or full carbon rim
• Gloss, matte, forged or coloured carbon finish
• Stitching colour and 12 o’clock centre stripe
• Flat bottom, round or slightly squared rim profile

We ship to more than thirty countries, mostly direct to workshops, tuners and distributors who resell under their own label.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: finished steering wheel, centre cover and a fitting guide.