BMW G80 M3 G82 M4 Carbon Fiber Front Lip with Hand-Laid Carbon Weave (2021-2023)

It sharpens the lower front bumper of the BMW G80 M3 G82 M4 Lip with Hand Laid Carbon Weave (2021 2023), dropping the visual mass of the nose and giving the car the stance the factory left out.

Fits: BMW G80 M3 G82 M4 Lip with Hand Laid Carbon Weave (2021 2023)

Shaped from a scan of the BMW G80 M3 G82 M4 bumper rather than a generic blank, which is why the edges sit flush instead of standing proud.

Most cars take 45-90 minutes with the wheels turned and the car on ramps; the bumper does not have to come off the BMW G80 M3 G82 M4.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

If your car is lowered, check the approach angle on your driveway first: the lip hangs about 40-60 mm below the factory bumper.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: lip, pre-applied 3M VHB tape, stainless self-tapping screws and a fitment card.