Hyundai Santa Fe Tucson Carbon Fiber Steering Wheel: Gloss Finish Replacement
$365.00 Original price was: $425.00.Current price is: $365.00.
Steering wheel for the Hyundai Santa Fe Tucson : Gloss Finish Replacement in carbon fiber. 45-75 minutes (professional advised) bolt-on fit, made to order in our own workshop, shipped worldwide with a 12-month warranty.
Built on an OEM core for the Hyundai Santa Fe Tucson : Gloss Finish Replacement, so it keeps the factory airbag and every steering-wheel button you already use.
Layered from 3K 2×2 twill and cured under vacuum in our own autoclave, so the resin-to-fiber ratio stays consistent from part to part.
Fits: Hyundai Santa Fe Tucson : Gloss Finish Replacement
The core comes from a Hyundai Santa Fe Tucson : wheel, so the splines, airbag connectors and button looms are factory – no adapters.
Professional fitting is recommended because of the airbag: disconnect the battery negative, wait, then swap the wheel and torque the centre nut to the factory figure.
If your original wheel has a heated rim, that function is not carried over – choose Alcantara grips if you want a warmer feel in winter.
Because each wheel is built to order, you choose the trim: carbon with leather, carbon with Alcantara or full carbon, plus the stitching colour, the 12 o’clock stripe and whether you want the top section left in leather.
- Gloss, matte, forged or coloured carbon finish
- Stitching colour and 12 o’clock centre stripe
- Flat bottom, round or slightly squared rim profile
- Carbon + leather, carbon + Alcantara or full carbon rim
Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.
We are the workshop, not a reseller. Yeedercar runs its own composite shop in Shishan, Nanhai, Foshan – roughly 1,000 m2 with an autoclave, a dust-free paint booth, CNC trimming and vacuum-bagging stations, plus twelve engineers and technicians who average eight years on carbon.
Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.
One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.
Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.
In the box: finished steering wheel, centre cover and a fitting guide.
Transform the driving dynamics of your Hyundai Santa Fe/Tucson with this meticulously engineered Deep Gloss carbon fiber steering wheel. Every contour, stitch, and material has been carefully selected to deliver an elevated tactile experience that enhances both daily commuting and spirited driving. This is not merely a cosmetic upgrade—it represents a fundamental improvement to your primary vehicle interface.
Build Quality & Engineering
Every component of this Deep Gloss carbon fiber steering wheel is manufactured to meet or exceed OEM specifications. The carbon fiber shell is laid up in a controlled clean-room environment to prevent contamination. After curing, each wheel undergoes CNC trimming, hand sanding through progressive grits, and multi-stage polishing to achieve the Deep Gloss surface quality.
The Full-Grain Leather upholstery is hand-fitted and stretched over precision-contoured foam substrates. Our stitching process uses UV-resistant bonded nylon thread rated for automotive interior applications, with back-tacking at every seam terminus to prevent unraveling.
What Makes This Wheel Exceptional
- Autoclave Processing: Unlike budget alternatives that use wet layup at ambient pressure, our carbon fiber is cured under heat and pressure in a computer-controlled autoclave. This eliminates voids and achieves maximum fiber-to-resin ratio.
- UV-Stabilized Clear Coat: The multi-layer clear coat system includes UV inhibitors that prevent the carbon fiber from yellowing or hazing over time, maintaining show-quality appearance for years.
- Hand-Finished Surface: Each wheel receives individual attention during the finishing process. From initial sanding to final polish, human craftspeople ensure every square inch meets our quality standards.
- Color Customization: Choose your preferred stitching color, leather type, carbon finish, and even a colored center marker stripe at the 12 o’clock position.
- Complete Kit: Ships with all necessary mounting hardware including a Grade 12.9 center bolt, torque specification reference card, and comprehensive installation guide.
Installation & Compatibility
Installation is designed to be straightforward for anyone with basic mechanical skills and common hand tools. The process mirrors factory steering wheel removal and replacement—there is no cutting, drilling, or permanent modification required. The wheel arrives fully assembled and ready to install. Simply transfer your factory airbag module, control buttons, and trim pieces to the new wheel, then mount it to the steering column using the supplied hardware.
Safety Note: Always disconnect the negative battery terminal and wait a minimum of 15 minutes before beginning any steering wheel work. This allows the airbag system capacitors to fully discharge.
Why Upgrade Your Steering Wheel
The steering wheel is the most frequently touched surface in any vehicle, yet it is often the most overlooked when it comes to upgrades. By installing this Deep Gloss carbon fiber steering wheel, you are enhancing the one control interface that directly connects you to the road. Every journey becomes more engaging, every corner more rewarding, and every detail of your Hyundai Santa Fe/Tucson interior becomes more complete.
Whether you are building a show car, preparing for track days, or simply want to make your daily drive more enjoyable, this steering wheel delivers measurable improvements in both aesthetics and function.
Related: All Hyundai carbon fiber parts · Hyundai Santa Fe Tucson Carbon Fiber Steering Wheel with · Hyundai Sonata 8 Carbon Fiber Steering Wheel Made to · Hyundai La Festa Carbon Fiber Steering Wheel | Forged
FAQs
Will this steering wheel fit my Hyundai Santa Fe Tucson : Gloss Finish Replacement?
It is built to the original Hyundai Santa Fe Tucson : mounting pattern, so the factory fixings are re-used and nothing has to be cut or drilled. If your car is a facelift or a different trim level of the same model, send us a photo of the steering wheel area and we will confirm before you order.
Is it carbon fiber?
Carbon fiber, laid up by hand, vacuum bagged and autoclave cured in our own workshop, then finished with a UV-stable clear coat. It is not a hydro-dipped or printed film.
Can I fit it myself?
Most owners do this at home in about 45-75 minutes (professional advised) with re-uses oem core, airbag and buttons and ordinary hand tools – the original fixings are re-used, so nothing needs welding or painting afterwards.
How long until it ships?
Each part is made after you order it, so allow 10-15 business days in production before dispatch. Express DHL, UPS and FedEx options are available, and tracking is sent as soon as it leaves the workshop.
Can you make it in a different finish or colour?
Yes. Gloss, matte, satin and forged carbon are all available, along with tinted clear coats and 3K, 6K or plain weave. Logo and emblem application under the clear coat is possible on most parts.
Do you offer wholesale or OEM pricing for bulk orders?
Yes – one piece is fine for a sample, and the same mould runs batches of 50, 200 or 1,000+ pieces. OEM and private-label work is welcome with your part number, logo and packaging.
| Material | Normal Carbon Fiber |
| Finish | Gloss |
| Grip | Leather |
| Stitching | — |
| Fitment | Hyundai Santa Fe/Tucson |
| Production Time | 12–18 Business Days |
| Warranty | 12 Months |
| Stock Status | Made to Order |
| Shipping | Worldwide tracked (DHL / UPS / FedEx / 4PX) |
| Weight | — |
| Origin | China |
| Construction | Carbon fiber (3K twill) |
| Weight (approx.) | 2.2-2.8 kg |
| Hardware | Re-uses OEM core, airbag and buttons |
| Installation Time | 45-75 minutes (professional advised) |
| Custom Options | Weave, finish (gloss / matte / forged), colour tint, logo |
| Bulk / OEM | Sample quantities and 50-1,000+ piece batches |
| Packing | Foam wrap, double-wall carton |
| Brand | Yeedercar |
Related products
-
Sale!
Carbon Fiber Exhaust Tip for Audi A3 A5 A6 A7 Q3 Q5 Q7 Q8 VW Golf Tiguan
$65.00 Original price was: $85.00.Current price is: $65.00. Add to cart -
Sale!
Audi B9 S4 Carbon Fiber Steering Wheel Made to Order — Matte Finish
$325.00 Original price was: $365.00.Current price is: $325.00. Add to cart -
Audi A6 C7 A7 S6 Carbon Fiber Steering Wheel | Matte Finish
$345.00 Add to cart -
Sale!
Magnetic Carbon Fiber Paddle Shifter Replacement for BMW M2 M3 M4 G80 F80 G20
$95.00 Original price was: $115.00.Current price is: $95.00. Add to cart
Reviews
There are no reviews yet.