Yeedercar Carbon Fiber Front Fender for Harley-Davidson Low Rider S ST

Fitted to the Harley-Davidson Low Rider S ST to replace a rusted or damaged wing with a composite panel that will not corrode again.

Fits: Harley-Davidson Low Rider S ST

Shaped to the original panel dimensions of the Harley-Davidson Low Rider S ST so the door and bonnet shut lines stay intact.

Wheel-arch liners and side repeaters transfer from the original panel on the Harley-Davidson Low Rider S ST.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Arch liners on modified cars are often trimmed; check clearance against the liner before final tightening.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: fender panel and a care card.