Yeedercar Glossy Carbon Fiber Mirror Covers for Alfa Romeo Stelvio

Moulded-from-OE mirror covers for the Alfa Romeo Stelvio — built to order in our workshop rather than a universal trim piece.

Fits: Alfa Romeo Stelvio

At a glance: Material — Carbon Fiber · Finish — Gloss · Fixings — Pre-applied 3M tape · Production — 10-15 Business Days · Warranty — 12 Months · Shipping — worldwide tracked (DHL / UPS / FedEx / 4PX)

Because the mirror covers are a separate part on the Alfa Romeo Stelvio, the paint underneath is left untouched, so the car can be returned to standard whenever you want.

The cartons are double-walled for export, so the clear coat arrives intact. Tell us if you are ordering other parts for the same car and we will pack them together.

These need very little looking after, just a pH-neutral wash most of the time. Wash as normal, but skip the abrasive compounds.

The mould is taken from the OE cover, so the clips and screw bosses sit in the factory positions. Fitting is fully reversible if you keep the originals.

The shell is laid up by hand in carbon fiber, then clear coated and buffed flat. Any pinholes, resin pooling or weave distortion are rejected before the clear coat goes on.

You do not need a workshop for this and it stays reversible if you keep the originals, so the car can be returned to standard later. Give the surface a proper degrease, warm the tape before you press it down. Allow 15-30 minutes for the pair.

Finish as shown is gloss; other weaves (3K twill, 6K twill, plain weave, carbon-kevlar hybrid) can be substituted.