Yeedercar Carbon-Look Matte Exhaust Tips for Ford Kuga Escape (2013-2019)

A quick visual upgrade for the rear of the Ford Kuga Escape (2013-2019) – the diffuser does the rest.

Fits: Ford Kuga Escape (2013-2019)

The inlet diameter matches the factory exhaust on the Ford Kuga Escape; measure yours if the car has an aftermarket system.

A hex key, a socket set and 30 minutes is enough; no welding required.

The standard layup is 3K twill; 6K, plain weave and forged carbon can all be produced on request.

Aftermarket exhausts often have a larger pipe diameter – measure yours before ordering so the clamps fit.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid

The shop floor is in Shishan, Nanhai – the composite cluster west of Guangzhou – and the same bench that runs this part also runs our OEM work for tuners and distributors.

One piece is fine for a first sample – there is no minimum order. When you need volume, the same mould runs batches of 50, 200 or 1,000+ pieces.

The packaging is built for a journey, not a shelf: foam wrap, corner protection and a double-wall carton, so the part arrives as it left the bench.

Rinse road salt and brake dust off regularly and wipe with a pH-neutral cleaner; a light wax keeps the clear coat glossy and stops dust bonding to the weave.

Because every piece is laid up to order, expect around two weeks in production before dispatch. Tracking is provided, and the 12-month warranty covers manufacturing defects such as de-lamination or a lifting clear coat.

In the box: tip set, stainless clamps and a fitting card.