Yeedercar Carbon Fiber Exhaust Tips for Lexus IS250 IS300 IS200t (Akrapovic Style)

A quick visual upgrade for the rear of the Lexus IS250 IS300 IS200t (Akrapovic Style) – the diffuser does the rest.

Fits: Lexus IS250 IS300 IS200t (Akrapovic Style)

The inlet diameter matches the factory exhaust on the Lexus IS250 IS300 IS200t; measure yours if the car has an aftermarket system.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

A hex key, a socket set and 30 minutes is enough; no welding required.

Aftermarket exhausts often have a larger pipe diameter – measure yours before ordering so the clamps fit.

Standard output is gloss clear coat over 3K twill, but matte, satin, forged carbon and tinted clear coats (including red and blue) are all available at order time.

• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: tip set, stainless clamps and a fitting card.