Yeedercar Custom Gloss Carbon fiber steering wheel leather with heated for Ford explorer

A hand-built replacement wheel for the Ford explorer: same diameter, same airbag, but with the rim, grips and stitching you choose.

Fits: Ford explorer

Airbag, horn, paddles and trim transfer across from your original wheel on the Ford explorer.

Each part is laid up by hand, cured under pressure, then trimmed on a CNC so the mounting edges sit flush.

Confident DIY owners do this in about an hour with a torque wrench and a steering-wheel puller; we include the battery-disconnect procedure.

Paddle-shift cars and manual cars use different cores; confirm from the listing photos before ordering.

Every wheel is finished to your spec – grip material, stitching colour, centre stripe and paddle finish are all selected when you order.

• Carbon + leather, carbon + Alcantara or full carbon rim
• Gloss, matte, forged or coloured carbon finish
• Stitching colour and 12 o’clock centre stripe
• Flat bottom, round or slightly squared rim profile

This is made in our own plant in Foshan, Guangdong rather than bought in and re-sold, which is why we can take a custom order and still quote a factory price.

Each part is weighed and measured against the master sample, then wrapped in foam and boxed in a double-wall carton with the hardware bagged separately.

Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.

Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.

Production is 10-15 business days because the part is made after you order it, not pulled off a shelf; after that it ships with tracking and a 12-month defect warranty.

In the box: finished steering wheel, centre cover and a fitting guide.