Honda 11TH Gen Civic Carbon Fiber Steering Wheel — Gloss Finish, Fits Factory Mounts
$365.00 Original price was: $385.00.Current price is: $365.00.
Steering wheel for the Honda 11TH Gen Civic — Gloss Finish, Fits Factory Mounts in carbon fiber. 45-75 minutes (professional advised) bolt-on fit, made to order in our own workshop, shipped worldwide with a 12-month warranty.
Built on an OEM core for the Honda 11TH Gen Civic — Gloss Finish, Fits Factory Mounts, so it keeps the factory airbag and every steering-wheel button you already use.
The clear coat is UV-stabilised, so the weave stays dark instead of fading to a chalky yellow under summer sun.
Professional fitting is recommended because of the airbag: disconnect the battery negative, wait, then swap the wheel and torque the centre nut to the factory figure.
Fits: Honda 11TH Gen Civic — Gloss Finish, Fits Factory Mounts
The core comes from a Honda 11TH Gen Civic — wheel, so the splines, airbag connectors and button looms are factory – no adapters.
If your original wheel has a heated rim, that function is not carried over – choose Alcantara grips if you want a warmer feel in winter.
Because each wheel is built to order, you choose the trim: carbon with leather, carbon with Alcantara or full carbon, plus the stitching colour, the 12 o’clock stripe and whether you want the top section left in leather.
- Flat bottom, round or slightly squared rim profile
- Carbon + leather, carbon + Alcantara or full carbon rim
- Gloss, matte, forged or coloured carbon finish
- Stitching colour and 12 o’clock centre stripe
Wash with a soft mitt and a pH-neutral shampoo, and avoid abrasive polishes or machine compounds that cut through the clear coat.
Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.
Our plant runs autoclave curing with logged temperature and pressure curves, so if a part ever fails we can trace the batch it came from.
Small runs are quoted per piece; above roughly 50 pieces the tooling cost is absorbed and the unit price drops, so ask for a stepped quote.
Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.
In the box: finished steering wheel, centre cover and a fitting guide.
The factory steering wheel in your Honda 11th Gen Civic is functional but uninspiring. Replace it with our Semi-Gloss carbon fiber steering wheel and discover what a difference the right materials, shape, and craftsmanship make to every drive.
Build Quality & Engineering
Every component of this Semi-Gloss carbon fiber steering wheel is manufactured to meet or exceed OEM specifications. The carbon fiber shell is laid up in a controlled clean-room environment to prevent contamination. After curing, each wheel undergoes CNC trimming, hand sanding through progressive grits, and multi-stage polishing to achieve the Semi-Gloss surface quality.
The Smooth Leather upholstery is hand-fitted and stretched over precision-contoured foam substrates. Our stitching process uses UV-resistant bonded nylon thread rated for automotive interior applications, with back-tacking at every seam terminus to prevent unraveling.
What Makes This Wheel Exceptional
- Autoclave Processing: Unlike budget alternatives that use wet layup at ambient pressure, our carbon fiber is cured under heat and pressure in a computer-controlled autoclave. This eliminates voids and achieves maximum fiber-to-resin ratio.
- UV-Stabilized Clear Coat: The multi-layer clear coat system includes UV inhibitors that prevent the carbon fiber from yellowing or hazing over time, maintaining show-quality appearance for years.
- Hand-Finished Surface: Each wheel receives individual attention during the finishing process. From initial sanding to final polish, human craftspeople ensure every square inch meets our quality standards.
- Color Customization: Choose your preferred stitching color, leather type, carbon finish, and even a colored center marker stripe at the 12 o’clock position.
- Complete Kit: Ships with all necessary mounting hardware including a Grade 12.9 center bolt, torque specification reference card, and comprehensive installation guide.
Professional Fitment Guaranteed
This steering wheel is designed and manufactured using 3D-scanned factory specifications to ensure perfect compatibility with your Honda 11th Gen Civic. The spline count, taper angle, and clock spring interface all match OEM dimensions exactly. Installation follows the same procedure as replacing a factory steering wheel and is fully reversible.
We recommend professional installation for customers unfamiliar with automotive interior work, particularly to verify proper airbag system function and steering angle sensor calibration after the swap. Most qualified shops can complete the installation in under one hour.
Why Upgrade Your Steering Wheel
The steering wheel is the most frequently touched surface in any vehicle, yet it is often the most overlooked when it comes to upgrades. By installing this Semi-Gloss carbon fiber steering wheel, you are enhancing the one control interface that directly connects you to the road. Every journey becomes more engaging, every corner more rewarding, and every detail of your Honda 11th Gen Civic interior becomes more complete.
Whether you are building a show car, preparing for track days, or simply want to make your daily drive more enjoyable, this steering wheel delivers measurable improvements in both aesthetics and function.
Related: All Honda carbon fiber parts · Honda Accord Civic Inspire Carbon Fiber Steering Wheel with · Honda Civic Type Carbon Fiber Steering Wheel — Hand-Laid · Honda Fit Civic Carbon Fiber Steering Wheel Made to
FAQs
Does this steering wheel fit the Honda 11TH Gen Civic — Gloss Finish, Fits Factory Mounts?
Yes. The tooling came off an original Honda 11TH Gen Civic — part, so the bolts and clips line up the same way. The one thing worth checking is the body style: sedan, coupe and estate versions of the same model can use different fixings.
What is it made from?
Carbon fiber, laid up by hand, vacuum bagged and autoclave cured in our own workshop, then finished with a UV-stable clear coat. It is not a hydro-dipped or printed film.
Do I need to drill or cut anything?
Most owners do this at home in about 45-75 minutes (professional advised) with re-uses oem core, airbag and buttons and ordinary hand tools – the original fixings are re-used, so nothing needs welding or painting afterwards.
How long until it ships?
Each part is made after you order it, so allow 10-15 business days in production before dispatch. Express DHL, UPS and FedEx options are available, and tracking is sent as soon as it leaves the workshop.
Can you make it in a different finish or colour?
Yes. Gloss, matte, satin and forged carbon are all available, along with tinted clear coats and 3K, 6K or plain weave. Logo and emblem application under the clear coat is possible on most parts.
Do you offer wholesale or OEM pricing for bulk orders?
Yes – one piece is fine for a sample, and the same mould runs batches of 50, 200 or 1,000+ pieces. OEM and private-label work is welcome with your part number, logo and packaging.
| Material | Normal Carbon Fiber |
| Finish | Gloss |
| Grip | Leather |
| Stitching | — |
| Fitment | Honda 11th Gen Civic |
| Production Time | 12–18 Business Days |
| Warranty | 12 Months |
| Stock Status | Made to Order |
| Shipping | Worldwide tracked (DHL / UPS / FedEx / 4PX) |
| Weight | — |
| Origin | China |
| Construction | Carbon fiber (3K twill) |
| Weight (approx.) | 2.2-2.8 kg |
| Hardware | Re-uses OEM core, airbag and buttons |
| Installation Time | 45-75 minutes (professional advised) |
| Custom Options | Weave, finish (gloss / matte / forged), colour tint, logo |
| Bulk / OEM | Sample quantities and 50-1,000+ piece batches |
| Packing | Foam wrap, double-wall carton |
| Brand | Yeedercar |
2 reviews for Honda 11TH Gen Civic Carbon Fiber Steering Wheel — Gloss Finish, Fits Factory Mounts
Related products
-
Sale!
Audi Q3 8U Q7 4M Carbon Fiber Steering Wheel: Hand-Laid Carbon Weave Replacement
$295.00 Original price was: $325.00.Current price is: $295.00. Add to cart -
Sale!
Audi Tt Mk2 8J Carbon Fiber Steering Wheel — LED Shift Lights & Leather Side Grips Replacement
$565.00 Original price was: $625.00.Current price is: $565.00. Add to cart -
Audi A6 C7 A7 S6 Carbon Fiber Steering Wheel | Matte Finish
$345.00 Add to cart -
Sale!
Audi B9 S4 Carbon Fiber Steering Wheel Made to Order — Matte Finish
$325.00 Original price was: $365.00.Current price is: $325.00. Add to cart
Marelin M –
I got this for my boyfriend, and he absolutely loves it! I also enjoy it – it’s super comfortable and has a great grip.
Jones –
Amazing looking piece, really recommended and very good quality