Yeedercar Custom Carbon Fiber 234 Motorcycle Exhaust for Motorcycle 450

Fitted to the Motorcycle 450 to replace the dull factory outlets with a pair of finished tailpipes.

Cut the old tips free if welded, slide these on, tighten the clamps evenly and check the tips sit level – around 30-45 minutes.

Fits: Motorcycle 450

Sized to slide over the standard pipework of the Motorcycle 450, with a stainless clamp that tightens onto the original outlet.

Aftermarket exhausts often have a larger pipe diameter – measure yours before ordering so the clamps fit.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish
• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Quality control is a visual inspection plus a fit check on the master jig; anything with a lifted clear coat or a distorted mounting edge is rejected rather than shipped and discounted.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

If you are a distributor, we can ship on your documents and hold stock under your SKU rather than ours.

Allow 10-15 business days for production plus transit time; express DHL, UPS and FedEx options are available at checkout, and the part carries a 12-month warranty against manufacturing defects.

In the box: tip set, stainless clamps and a fitting card.