Custom Carbon Fiber 364 Ktm Exhaust for KTM 390 K21

Fitted to the KTM 390 K21 to replace the dull factory outlets with a pair of finished tailpipes.

It weighs a fraction of the steel or plastic original, without the flex you get from a thin fiberglass copy.

Fits: KTM 390 K21

Sized to slide over the standard pipework of the KTM 390 K21, with a stainless clamp that tightens onto the original outlet.

Cut the old tips free if welded, slide these on, tighten the clamps evenly and check the tips sit level – around 30-45 minutes.

Aftermarket exhausts often have a larger pipe diameter – measure yours before ordering so the clamps fit.

Weave, finish and edge treatment are all chosen when you order: glossy 3K twill is the default, while matte, forged carbon, coloured clear coat and carbon-kevlar hybrids are produced on request.

• 3K twill, 6K twill, plain weave or carbon-kevlar hybrid
• Coloured tinted clear coat (red, blue, yellow)
• Logo application or badge cut-outs on request
• Gloss, matte, satin or forged carbon finish

A ceramic or wax coat once a season is all this needs – the clear coat handles UV, but it is not a scratch-proof layer.

Because the tooling is in-house, changes that a trader would refuse – a different weave, a logo under the clear coat, a slight trim to clear a roll cage – are normal work for us.

Every unit is checked against a photo checklist – pinholes, weave alignment, mounting-hole position and clear-coat flow – before it is packed.

OEM and private-label work is welcome: your part number, your logo, your packaging, with an NDA if you need one.

Made to order in our workshop, typically 10-15 business days before it ships worldwide with tracking, backed by a 12-month warranty against manufacturing defects.

In the box: tip set, stainless clamps and a fitting card.